Skip to content

The Micro Mixbus module is a small form-factor bus inspired by those found on Moog Modulars. With twelve inputs and twelve outputs which can be configured in n-m mixing up to the connected output. The control knobs can be set (at module level) to be linear percentage-based or dB based.

Connecting an output jack mixes the signals up to that jack (from a previous output jack). The UI clearly shows the signal routing and the attenuation is +/- 100% on each input. There is also a “Direct Injection” input at the start to allow easy chaining of these units if needed.

This can be useful for mixing the multiple audio or CV waveforms from an oscillator before the “main” mixing stage, or for controlling the amount of multiple CVs for a module.

Annotated image of Micro Mixbus module with description of controls
Back To Top